Komatsu — CONNECTING EXTERNAL POWER SOURCE

. ATTACHMENTS, OPTIONS EXTERNAL POWER SOURCE TYPE ELECTRIC HEATER source for this heater can be taken from an external commercial power supply to the socket on the side of the machine. Power supply to use: 3-phase, AC 230V, 2.7kW temperature of the coolant and engine oil from going down. For engine heater: 230V, 2.7kW 6 - 94 EXTERNAL POWER SOURCE TYPE ELECTRIC HEATER When the engin e has been stopped, to mak e it easier to start t he engine again next time and to carry out operations, this external el ectric heater is provided to heat all parts of th e machine and maintain the t emperature.

The p ower SOCKET FOR ENGINE HEATER This socket (1) can be connected to an exte rnal commercial p ower supply. If this is done, the engine oil pan (2 places) and coola nt (1 place) can be h eated to make it easier to sta rt the engine next time. When the amb ient temperature is below -20°C (-4°F), or if the night will go b external power su it is expected and t -20°C (-4°F), hat the temperature during connect socket (1) to an elow pply immediately aft er stopping the engine.

CONNECTING EXTERNAL POWER SOURCE When the mach ine is stopped, if it is expect ed that the temperature will go below - 20°C (-4°F), run electricity fr om external suppl y (1) through the en gine oil pan heater and cool ant heater immediately after stopping t he engine at the end of the d ay. This will preven t the REMARK If the ambi ent temperature is above 0°C (32°F), do not use the engine heater. It will cause premature n of the oil. deterioratio When te en gine coolant has been chang ed, run the engine at low idling to bleed the air f rom the coolant. If there is air in the coolant, the circulation will b e poor and the te mperature maintenance effec t will drop.