3.4 ELECTRONIC TEXT MONITORING SYSTEM ETM OPERATION Grouping of the Messages according to their Priority The messages are divided into four priority groups. A Message of a higher priority group remains on the display, even if further mes- sages of a lower priority group occur. These messages are regis- tered and statistically analyzed, although the are not displayed. 1st Priority Group: Fault messages resulting in automatic shifting to low idle speed respectively, shutdown of the engine System adjustments Page number: 9: Low idle speed: coolant temperature too high 11: Low idle speed: High pressure filter #1 restricted 12: Low idle speed: High pressure filter #2 restricted 13:
Low idle speed: High pressure filter #3 restricted 27: # Date: (adjustment) 28: # Time: (adjustment) 29: # Hours of operation: (adjustment) 30: # Protocol and statistics cancelled (adjustment) 39: Engine shutdown: main shut-Off (gate) valve closed 40: Engine shutdown: overspeed 42: Low idle speed: too low coolant pressure 43: Engine shutdown: emergency stop switch actuated 47 Engine shutdown by engine control module 51: Engine shutdown: pull switch from ground man actuated 2nd Priority Group: Page number: 10: Engine shutdown:
engine oil pressure too low 57 Load limit regulation fault NOTICE If a fault message of priority group 1 or 2 is displayed, move the shovel to a safe place, shut down the engine and inform your service staff about the trouble condition. 124