OPERATION 3.7 ELECTRICAL EQUIPMENT IN CAB BASE 3.7.2 COMPONENTS OF ELECTRICAL PREHEATING SYSTEM IN CAB BASE The cab base contains high voltage electrical appliances. Access to the cab base for authorized service staff only. General The preheating system is special equipment and can be installed in the factory or locally at site. Power supply to the preheating system is provided by an external power source. The following systems are equipped with heaters: Engine cooling system Engine lubricating system Hydraulic system (main and suction oil reservoir) PTO’s (pump distributor gears) Storage batteries REMARK The auxiliary heater unit in the cab base (5), illust.
Z25424 and the battery charger (2) are also connected to the external power supply. Legend for illustration Z25386 (1) Main switch board box (X2). See page 147 for more information (2) Battery charger E55 (3) Fuse box with circuit breaker 1F1 - 125A for battery charger (4) Key switch for battery charger S153 (2) (5) Heater unit for cab base (6) Wall bracket for heater unit (A) External power socket for battery charger 151 WARNING WARNING