MAINTENANCE 4.6 LUBRICATION AND MAINTENANCE SCHEDULE (1) Perform maintenance according to separate Engine Operation an Maintenance Manual filed in volume 2 binder. (2) Perform inspections according to the separate Manual ”FIRE SUPPRESSION SYSTEM” filed in volume 2 binder. (3) Perform inspections according to the separate Manual ”OPERATING INSTRUCTIONS AC” filed in volume 2 binder. Carry out initial service according to item 4.6.1.
253 Service Intervals Service Point Service See Every 1000 operating hours or every 6 months High strength bolt connections Check for correct tightening torque and security page 345 Hydraulic system Replace return and pressure fil- ter elements Clean or replace high pressure filter elements Replace breather filter elements Drain sediments page 377 PTO (Pump distributor gear) Swing gear and Travel gears Oil sample analysis page 391 Signal horn compressor Clean and lubricate page 393 Hydraulic track tensioning system Check pressure accumulators page 395 Hydraulic oil cooler doors and machinery house doors Inspect and lubricate door hinges page 397 Engine Maintenance (1) Fire suppression system Maintenance (2) Air conditioning Inspect the complete system (3) CAUTION CAUTION