Komatsu — 4.9.2 TRAVEL GEARS, BRAKE HOUSINGS AND MOTOR ADAPTER HOUSINGS - CHECK OIL LEVELS

MAINTENANCE 4.9 EVERY 50 OPERATING HOURS OR WEEKLY SPUR GEAR BOX - CHECK OIL LEVEL Check oil level by removing oil level plug (4). Oil level should be at lower edge of opening (4), if necessary add oil through filler opening (5). Install level and filler plug (4 and 5). Check breather filter (13) for restriction. If necessary, remove breather filter, blow out with compressed air from inside to outside and reinstall. BRAKE HOUSINGS - CHECK OIL LEVEL Check oil level by removing oil level plug (7). Oil level should be at lower edge of opening (7). If necessary Add oil through filler openings (8) and install plugs (7) and (8).

MOTOR ADAPTER HOUSING - CHECK OIL LEVEL Check oil level by removing oil level plug (10). Oil level should be at lower edge of opening (10). If necessary, remove connector (11) for breather filter line and add oil through filler opening. Install level plug (10) and screw in breather filter line connector (11). Check breather filter inside the center frame for restriction. If necessary, remove breather filter, blow out with compressed air from inside to outside and reinstall. MILEAGE INDICATOR (Special Equipment) The mileage indicator is fitted to the center bore of the spur gear box. NOTICE Travel gears, Brake- and Motor adapter housings have to be filled with different types of oil.

Refer to page 245 for the cor- rect oil specifications. 307