MAINTENANCE 4.13 EVERY 2000 OPERATING HOURS OR YEARLY HYDRAULIC SYSTEM - CHANGE OIL, REPLACE SUCTION STRAINERS AND PULSATION DAMPER Legend for illustration Z25012 (1) Main hydraulic pump -1- (2) Main hydraulic pump -2- (3) Location of main hydraulic pump -3- (shown on next page) (4) Hydraulic oil cooler fan drive pump (5) Flexible hoses (6) Flange (7) O-rings (8) Suction strainer (11) Suction oil reservoir (12) Drain coupling Drain oil from suction reservoir Drain the oil from suction reservoir (11) by attaching the drain hose (part of tool set) to coupling (12). Replace suction strainers of the hydraulic pumps 1. Remove mounting bolts of flange (6). 2.
Move away flexible hose (5) with flange (6). 3. Remove strainer (8) with O-rings (7) and discard. 4. Install new strainer (8) with new O-rings (7). 5. Locate flange (6) above the strainer and tighten the mounting bolts of flange (6). 6. Check to make sure that the hose clamps of the suction hoses are in good condition and properly fitted. 403