MAINTENANCE 4.13 EVERY 2000 OPERATING HOURS OR YEARLY HYDRAULIC SYSTEM - CHANGE OIL, REPLACE SUCTION STRAINERS AND PULSATION DAMPER Legend for illustration Z25013 (3) Main hydraulic pump -3- (5) Flexible hoses (6) Flange (7) O-rings (8) Suction strainer (9) Control oil pump (pilot oil circuit) (10) PTO gear lubrication pump (11) Suction oil reservoir (12) Drain coupling Replace Suction Strainer of Main Pump (3) 1. Remove mounting bolts of flange (6). 2. Move away flexible hose (5) with flange (6). 3. Remove strainer (8) with O-rings (7) and discard. 4. Install new strainer (8) with new O-rings (7). 5. Locate flange (6) above the strainer and tighten the mounting bolts of flange (6). 6.
Check to make sure that the hose clamps of the suction hoses are in good condition and properly fitted. 405