WHEN REQUIRED g. REPLACING BUCKET TEETH If the bucket equipped with tip tooth. Replace the teeth before they wear down as far as the adaptor. 3. Steering column (1 point) If the play of the steering column is heavy or does not return properly, 0 apply grease. * When extracting pin (21, strike the part (either the left or right part) with a sharp object. This will enable the pin to be extracted from the opposite side. 1. Extract pin (2) fitted to the bucket and then remove tooth (I). 2. Insert the new tooth (I) into the adaptor (31, and insert pin (2) partway as shown in the diagram. Then drive it home by means of a hammer. W-04323 - 113-