FUEL, COOLANT AND LUBRICANTS NOTE: (I) When fuel sulphur content is less than 0.5%, change oil in the oil pan every periodic mainte- nance hours described in this manual. Change oil according to the following table if fuel sulphur content is above 0.5%. (2) When starting the engine in an atmospheric tem- perature of lower than O”C, be sure to use engine oil of SAEIOW, SAEIOW-30 and SAEl5W-40, even though an atmospheric temperature goes up to 10°C more or less in the day time. Use API classification CD as engine oil and if API classification CC, reduce the engine oil change in- terval to half. For axle oil, use only recommended oil as follows. SHELL: DONAX TT or TD CALTEX:
RPM TRACTOR HYDRAULIC FLUID CHEVRON: TRACTOR HYDRAULIC FLUID TEXACO: TDH OIL MOBIL: MOBILAND SUPER UNIVERSAL * It is possible to substitute engine oil CLASS-CD SAE30 for axle oil. ASTM: American Society of Testing and Material SAE: Society of Automotive Engineers Specified capacity: Total amount of oil including oil for components and oil in piping. Refill capacity: Amount of oil needed to refill system during normal inspection and maintenance. W-02175 - 127-