REMOVAL AND INSTALLATION OF BUCKET 9. Attach the lock plate for bucket 10. Install retainer (I) and shim (2) pin (5) to the block on the hinge (Standard thickness: 2.5 mm) plate and then secure the lock to bucket pin (5). plate with cam (4). Sr Adjust the thickness of the shim so that the clearance be- tween the end surface of the re- tainer and the hinge plate is re- duced to less than 0.2 mm. 1 1. install bucket link pin according to the procedure 1 to 10. 12. Lubricate the bucket pin and bucket link pin by referring to the section EVERY 2000 HOURS SERVICE. W-03780 - 37 -