INSTRUMENTS AND CONTROLS A: CHECK MONITOR GROUP (Check items before starting) 1. BRAKE OIL LEVEL MONITOR 3. RADIATOR COOLANT LEVEL MONITOR L?_J * Do not rely on the “CHECK MONI- TOR GROUP (Check before starting)” only for the check before starting. Always make the check by referring to the section on CHECK BEFORE STARTING. This monitor indicates a low brake oil level. If the monitor lamp flashes, check the oil level and add brake oil as required. This monitor indicates a low radiator coolant level. If the monitor lamp flashes, check the coolant level and add water as required. 2. ENGINE OIL LEVEL MONITOR 0 & * Park the machine on level ground and check the monitor lamps.
* Confirm that these monitor lamps light for about 3 seconds after turning the starting switch to ON. If any monitor lamp does not light, ask your Komatsu dis- tributor to inspect that monitor lamp. A This monitor indicates a low oil level in the engine oil pan. If the monitor lamp flashes, check the oil level in the engine oil pan and add oil as required. W-01251 -7-