EVERY 100 HOURS SERVICE c. LUBRICATING Apply grease to the grease fit- tings shown by arrows. 1 Lift arm pivot pin (2 points) 2. Dump cylinder pin (2 points) 3. Tilt lever pin (I point) 4. Bucket link pin (1 point) 3. Align the direction of the arrows and assemble. Direct dry compressed air (less than 7 kg/cm? to element from inside along its folds, then direct it from outside along its folds and again from inside, and check element. A When using compressed air, wear safety glasses and other things required to maintain safety. * ,, ,, ,,,., ,, ,,,,,, ,,,,,,,,, -81 - W-04298