EVERY 2000 HOURS SERVICE c. AIR CONDITIONER FILTER d. HYDRAULIC TANK BREATHER Use the same procedure to change the oil for the front and rear axles. Refill capacity: 360 !Z(each axle) The type of lubricant used depends on the ambient tempera- ture. Select according to the table “FUEL, COOLANT AND LUBRICANTS”. 1. Open the cover located on the behind of the operator’s seat. Loosen nut (1) holding the filter element, pull out element (2). Install a new element and close the cover. 1. Remove cap of oil filler. A When removing the cap, turn it 2. slowly to relieve inner 3. pressure. 2. Remove snap ring on breather (I 1, then remove breather cap. w-04309 - 99 -