INSTRUMENTS AND CONTROLS 65 12 - OPTIONAL EQUIPMENT CONTROL SELEC- TION SWITCH CAUTION • This switch must be used only for equipment that requires continuous and prolonged operation (for example, the bush cutter). This switch changes the function of the control positioned on the right joystick lever (see “3.3.3 pos. 6 CLAMSHELL BUCKET RYA13830 CLOCKWISE ROTATION BUTTON”) from push-button mode into switch mode. With the LED off, the control on the right joystick is always in push-button mode, as required for the standard setting of the ma- chine. With the LED on, the control on the right joystick changes over to the switch mode.
This function is activated by pressing the switch once and discon- nected by pressing it again. IMPORTANT • If the machine is not fitted with optional equipment the op- eration of this switch is inhibited. CAUTION • This switch must be used only for equipment that requires continuous and prolonged operation (for example, the bush cutter). This switch changes the function of the control positioned on the right joystick lever (see “3.3.3 pos. 6 CLAMSHELL BUCKET CLOCKWISE ROTATION BUTTON”) from push-button mode into switch mode. With the LED off, the control on the right joystick is always in push-button mode, as required for the standard setting of the ma- chine.
With the LED on, the control on the right joystick changes over to the switch mode. This function is activated by pressing the switch once and discon- nected by pressing it again. RYA13830 RYA13830 IMPORTANT • If the machine is not fitted with optional equipment the op- eration of this switch is inhibited. 13 - HYDRAULIC PLIERS USE ENABLING SWITCH IMPORTANT • This device enables the operation of the hydraulic pliers control. When this switch is pressed, the LED comes on and activates the hydraulic pliers control circuit. The hydraulic pliers control is operated through the pedal posi- tioned near the driver’s seat, on the left side (see “3.3.5 pos.
4 POSITIONER OR HYDRAULIC PLIERS CONTROL PEDAL”). RWA18240 When the switch is pressed again (LED off), the control is discon- nected. IMPORTANT • This device enables the operation of the hydraulic pliers control. When this switch is pressed, the LED comes on and activates the hydraulic pliers control circuit. The hydraulic pliers control is operated through the pedal posi- tioned near the driver’s seat, on the left side (see “3.3.5 pos. 4 POSITIONER OR HYDRAULIC PLIERS CONTROL PEDAL”). When the switch is pressed again (LED off), the control is discon- nected. RWA18240 RWA18240