USE OF THE MACHINE 3.6.1.3 OPERATIONAL CHECKS 96 • All the checks must be carried out by the operator while seated, with fastened safety belt. • If the machine has been stopped after use or in order to carry out maintenance operations, the safety devices may have been disconnected; when the operator gets on the cab, he must make sure that all the safety locks of the equipment controls are in the correct position and there- fore that the equipment cannot move suddenly and cause accidents. The checks concern: 1 - the locking of the safety device; 2 - the accelerator idling position; 3 - the neutral position of the controls.
The following check is carried out by turning the ignition key to po- sition “I” to apply voltage to the control panel and check the func- tionality of the acoustic alarm, fuel level indicator and the engine oil pressure, generator and preheating warning lights. RWA01960