. OPERATION OPERATION FASTENING AND REMOVING SEAT BELT Always install a seat belt on machines equipped with ROPS. WARNING 5. Pull the belt to check that it is securely locked in position. 6. When removing the belt, press the red button on buckle (3). The belt will automatically retract. 3 - 58 Before fastening the seat belt, che ck that there is no problem in the securing brackets or belt. If there is any wear or da mage, replace. Even if there appears to be no pro blem in the seat belt, replace the seat belt once every 3 years. The date of manufact ure is woven on the reverse side of the belt. fore operating the machine. erating the machine. r half of the belt twisted.
Adjust and fasten the seat belt be Always use the seat belt when op Do not use the seat belt with eithe Check that the bolts of the clamp securing the belt to the chassis are n ot loose. Tighten them if they are loos The tightening torque for the mo unting bolt is 24.5 ± 4.9 Nm (2.5 ± 0.5 k gm, 18.1 ± 3.6 lb ft). the seat belt unit. If the belt surface is scratched or frayed or if the fittings are broken or d eformed, replace the seat bel FASTENING AND REMOVING SEAT B ELT brake pedal fully, and adjust the seat so that your back is pressed against the ion, adjust tether belt (1). Tense hen there is no one sitting on the ongue (4) connected to wind-in he belt slowly so that the belt will ntly.
) until it clicks. The belt is pulled m (2) until it is fitted to your under this condition and cannot e belt to your abdomen without 1. Sit on the seat, depress the backrest. 2. After adjusting the seat posit the tether belt and install it w seat. 3. Sit on the seat and hold t mechanism (2) and pull out t cover your abdomen sufficie 4. Insert tongue (4) in buckle (3 back into wind-in mechanis abdomen. The belt is locked be extended anymore. Fit th twisting it. REMARK If the belt is locked before the ton gue is inserted in the buckle, let it return to the wind-in me chanism, then repea t the above procedure from the start.