Komatsu — LOADING, UNLOADING WORK

. OPERATION TRANSPORTATION referring to the section, "STARTING IN COLD 3 - 105 UNLOADING WOR 1. Load and unlo ad on firm level ground o nly. Maintain a safe distance from the edge of 2. Properly apply the brakes on the trailer and put blocks under the tires to ens ure that the trailer does not move Make the slop e of the ramps a maximu m of 15°. 3. Remove the ch ains and wire r opes fast ening the machine. 4. Start the engin e. ther, carry out an engine warming-up run AGE 3-71)", in this manual. quipment lock lever to the FREE position. e. In a cold wea WEATHER (P AGE 3-71)", in this manu 5. Set the work e quipment lock l ever to th e FREE position 6. Raise the blad 7.

Set parking br ake lever to the FREE po sition. 8. Set the transm ission in the 1s t gear and run the engine at l ow idle. irection toward the ramps and drive slowly. 9. Set the travel d irection toward the ramp s and drive slowly. 10. The center of gravity of the machine shifts suddenly at the border betwee n the ramps and trailer, and the machine is d becomes dangerous. Accordingly, pass the e ramps slowly and carefully until the machine ps perfectly. nd trailer , and th e m achine is unbalanced an Accordingly, the border slowly. 11. Drive down th leaves the ram