. OPERATION LONG-TERM STORAGE LONG-TERM STORAGE DURING STORAGE WARNING 3 - 110 BEFORE STORAGE rm storage (more than one month), store as follows. When keeping in long-te rm storage (more than one mo nth), store as Clean and wash all p arts, then store the machine ind oors. If the machine ha s to be store d outdoors, s elect level ground and cover the machine with a sheet. from collecting. ydraulic piston rods and the idler adjusting rods. Completely fill the fue l tank. This prevents moisture from collectin Lubricate and change the oil before storage.
Apply a thin coat of g rease to metal surface of the h ydraulic piston rods an d the idler adjustin Disconnect the negati ve terminals of the battery and c over it or remove it from the machine and s tore it s eparately. Place all control lever s at the neutral position, opera te the safety l ever and parking lever to th e LOCK then move the fuel co ntrol lever to the low idling pos To prevent corrosion, be sure to fill the cooling system with Supercoolant (AF -NAC) or permane nt type antifreeze (density between 30 % and 68%).
If it is necessary to perform the rust-prevention operation whil e the machine i s indoors, open the doors and windows to improve ventilation and prevent gas poisoning. During storage, opera te and move the machine for a short distance once a m onth so that a new film of o il will coat moving parts. At the same time, also charge the bat tery. se off the hydraulic piston rod. he air conditioner. Before operating the work equipment, wipe the grea se off the hydraulic pis ton rod. For machines equipp ed with an air conditioner, run t he air conditioner.
AFTER STORAGE NOTICE If the machine has been st ored without carrying out the mon thly rust-prevention oper ation, consult your K omatsu distributor before using it. When using the machin e after long-term storage, do as follows befor e using it Wipe off the grease fr om the hydraulic cylinder rods. Add oil and grease at all lubrication points. When the machine is stored for a long period, moistur e in the air will mix with t he oil. Check the o il before and after starting the engine. I f there is water in the oil, chang e all the oil.