Komatsu — OTHER TROUBLE

. OPERATION TROUBLESHOOTING 3 - 118 CHASSIS ( ) : Always contact your Komatsu distributor when dealing with these items. In cases of problems or causes which are not listed below, contact your Komatsu distributor for repairs.

Problem Main causes Remedy When brake pedal is depress, machine does not stop ( Adjust, check, repair) Track comes off Track too loose Adjust track tension, see WHEN REQUIRED Abnormal wear of sprocket Blade, rises slowly, dose not rise Add oil to specified level, see EVERY 250 HOURS SERVICE Set lever in free position Dose not steer even when steering as operated Set lever in free position ( Check, repair) Noise is generated from idler Add oil to specified level, see WHEN REQUIRED Blade control lever is not held at FLOAT position Carry out warming-up operation Transmission oil pressure dose not rise ( Check, repair) Add oil to specified level, see CHECK BEFORE STARTING Clean For details, see EVERY 1000 HOURS SERVICE Lacks drawber pull (cannot travel Lack of drive power from engine See ENGINE RELATED PARTS Travel speed does not rise quickly Warm up machine See ENGINE RELATED PARTS Machine dose not move off when steering, directional and gear shift lever is placed in gear Add oil to specified level, see CKECK BEFORE STARTING See "Transmission oil pressure dose not rise" above Set lever in free position ( Check, repair) Torque converter overheats (indicator enters red range) Add oil to specified level, see CHECK BEFORE STARTING See "Transmission oil pressure dose nor rise" above ( Check, repair) Shift down one position, or reduse the load and increase the speed when operating