Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE or WHEN LOOSENING TENSION WARNING except the procedure given below. If the track tension is not 4 - 25 4. Continu tension is still loose, the be pins a worn, s o they must either turned contact your K omats u distributor If the s are excessively replac It is extremel grease by relieved by th is procedure, pleas e contac t your K omatsu dis 1. Loosen plug ( 1) gradually to rele ase the grease. e turn. 2. When lo oseni ng plug (1), turn it a maximum of on e turn. 3. If the gr ease d oes no t come out smoothly, move t he machine forward s and backwards a short distance. 4. Tighten plug ( 5.

To chec k that t he correct t ension has been achieve d, move the machine backwards and forward s. 6. Check t he trac k tension a gain, an d if the tension is not correct, adjust it again .