. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE 4 - 68 6. Remove seal (6) pla ced the fr ame. 7. Remove bolt (8) of fi lter case ( 7) and then cover (9). 8. Remove 9. Clean the inside of t he case a nd removed parts. Install a n ew filter. A lways us e Komatsu g enuine filter 10. Install dra in plug (3) 11. After repl acing, run t he engine and leave th e air-bleeding plug (11) loos e, then tigh ten plug ( 11) whe n all a ir is r eleased. 12. Close filte r cover (4) and tight en bolt ( NOTICE When repla cing seal (6) , do it after closing cover The seal wi ll be damage d if the filt er cover closes after replacing it. 13. Replace seal (6). uantity of oil through oil filler (F).
s at the specified level. For details, see 14. Refill the specified q uantity of oil through oi l filler (F). 15. Check th at the oil i s at the s pecified leve l. For details, "CHECK OIL LEVEL IN HYDRAULIC TAN K, AD D OIL (PAGE 4-48)".