. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE WARNING 4 - 70 Th e parts and oil i s very hot just after the operat ion. Wait until the oil temperature drops , then start the work. ry to open or Th e undercover is heavy. Never t directl y beneath it. When removing bolts (2), carry out the work fr om the re ar of the cover s o that you can e asily get out of When removing dr ain plug (5 ) of t he damper cas e, take care not to get oil ove Refill capacity: 1 .7 liter (0.45 U 1. Remove the un dercover from ody as follows 1) Remove tw ody. 2) Holding the cover, remov e two bolts (2 ) from the rea r side f the mach ine body. 3) L ower and open the cove 2.
Remove oil lev el plug (3 ) an d oil filler plu g (4), then re move d p rain plug (5) to drain the oil. After the all o il is drained, t ighten lug (5). the hole of oil filler plug (4) until the oil level ttom edge of the hole of oil level plug (3). e oil, tighten plugs (3) and (4). 3. A dd oil through r eaches the bo ttom edge of t he hole of oil level plug (3) 4. A fter refilling th e oil, tighten p lugs (3) and (