. ATTACHMENTS, OPTIONS HANDLING TOWING WINCH OPERATION WARNING INSPECTION AND ADJUSTMENT BEFORE STARTING ENGINE 6 - 10 Injury de ath could result if the con trol lever is operated incorrectly du ring winch op erations, so always do as follows. Do no t operate in a different wa y from the method given in th is manual. Alway s wear leather gloves whe Do no rotatin rotatin When carrying out the winch o peration with another worker , agre e on signal s before starting the oper ation. Do no t use a wire rope which ha s cut strands (A), reduced di ameter (B), or kin ks (C). Always replace wit h a new wire rope.
Excep t when operating the winc h, always set the winch lock k nob to the LOCK position to lock the winc h control lever. re operating the winch, except when lways set the winch control lever to Alway s stop the machine befo ing the brake. moving the machine, a releas When neutra l, then set the winch lock knob to the LOCK position to lock the winch contriol lever. any when WALK-AROUND CHECK 1. Che If an 1. Che ck wire rope and hook. y abnormality is found, OPERATIONS AND CHECKS BEFORE STARTING ENGIN Before s tarting the engine, che ck the position of every le Chec k that winch lever (1) is Chec k that winch lock knob (2) is at the LOCK positio