Komatsu — SERVICE PROCEDURE

. ATTACHMENTS, OPTIONS HANDLING TOWING WINCH SERVICE PROCEDURE INITIAL 250 HOURS SERVICE 1000 HOURS SERVICE. EVERY 1000 HOURS SERVICE CHANGE GEAR CASE OIL AND CLEAN STRAINER WARNING 6 - 15 Perform th e following ma intenance only afte r the first 2 50 hou Change gear case oil and clean s trainer For details of the method of replacin g or maintaining, s ee the section o The oil is at high te mperatur e immediate ly after th e machine has been operated. Wait for the oil to cool down before start ing the operation. Refill ca pacity : 76 liter s (20.08 US gal) 1. 2. 1. Set th e container to c atch the oil immediately unde r drain p lug (P). 2.

Loose n drain plug (P ), drain the oil, then tighten drain plug (P) again. 3. Remo ve strainer cov er (1), then t ake out spring ( 2), strainer (3) and ca se (4) and cle an them. NOTICE After washi ng the strainer w ith flushing oil, blow i t with compressed a ir to completely remov e all the d irt. 4. Install case ( 4), strai ner (3), spri ng (2), a nd straine r cover (1), then a dd oil through oil filler (F). NOTICE atch the ambient temperature. Use oil to m atch th e ambien t temperatur More than 0 °C (32 °F): Engin e oil CD clas s SAE30 Less than 0 °C (32° F): Engin e oil CD clas s SAE10