. SAFETY PRECAUTIONS FOR OPERATION slip, so be particularly and this may cause the always carry out operations several times). If is no hazard of landslides, falling and leave it in the specified place. 2 - 21 OPERATE CAREFULLY ON SNO W Snow-covered or frozen surf aces are slippery, so be extremely careful when traveling o and do not operate the lever s suddenly. Even a slight slope may cause the machine pes. , the ground becomes soft when the temperature rises, it impossible for the machine to escape.
careful when working on slo With frozen ground surfaces machine to tip over or make it impossible for the machine to e If the machine enters deep s now, there is a hazard that it may tip over or become burie not to leave the road shoulde r or to get trapped in a snow drift . When clearing snow, the roa d shoulder and objects placed beside the road are buried in seen. There is a hazard of th carefully. e machine tipping over or hitting covered objects, so alw When traveling on snow-cove red slopes, never apply the brake s suddenly. Reduce the s as a brake while appling t he foot brake intermittently (depress the brake intermit o the ground to stop the machine.
necessary, lower the blade t o the ground to stop the machine. PARKING MACHINE Park the machine on firm, le Select a place where there rocks, or flooding. Lower the work equipment c When leaving the machine, set the steering, forward-reverse gear shift lever in the N (Neut ral) position and set the blade leve in the HOLD position, then a pply work equipment lock lever (1 and parking brake lever (2) a nd stop the engine. Always close the operator's c ab door, and use the key to lock a the equipment in order to pre vent any unauthorized person from moving the machine. Alway s remove the key, take it with you If it is necessary to park the machine on a slope, always do a follows.
Set the blade on the down Put blocks under the tra moving. follows. Set the blade on the down hill side, then dig it into the ground cks to prevent the machine from