Komatsu — CONTROL LEVERS AND PEDALS

. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS 3 - 25 Pitch c First set th e lever to the neutral p osition, then keep switch (A) in the center of t he kno d pushed d own and carry out the tilt operation to change th e cutti ng angle of the blade (b) HOLD : Blade is stopped and held in this position. (e) REAR PITCH : Min. digging angle (f) FORWARD P ITCH: Max . digging Precautions w hen using pitch contro l When usi ng the pitch operation, the t ilt operation changes as f ollows. Pitch condition Tilt operation Amount of tilt Max. forward pitch Only left tilt operation is possible Max.

890 mm (35.1 in) Forward pitch Both left and right tilt operations are possible Compared with standard: LEFT tilt is LARGER RIGHT tilt is SMALLER Standard pitch 460 mm (18.1 in) (both left and right) Rear pitch Compared with standard: LEFT tilt is SMALLER RIGHT tilt is LARGER Max. rear pitch Only right tilt operation is possible Max. 890 mm (35.1 in)