. OPERATION EXPLANATION OF COMPONENTS METHOD OF OPERATION NORMAL USE Set each switch to the desired position. 3 - 41 TEMPERATURE CONTR This lever (3) is used to control the temperature for h When the temperatu re control lever is move d to t he ri ght, the temperature of the ai r coming from the vents becomes lowe When the temperatu re control lever is moved to the left, the temperature of the ai r coming from the vents becomes higher. TO HEAT QUICKLY Set the switches to the position shown in the diagram on t he r ight to carry out heating qui ckly. Set FRESH/RECIRC selector lever (1) and temperature control lever (3) to the positi on in the diagram on the right.
Set blower switch (2) NOTICE If h eating is carried out co ntinuously for a long period with t he lever a t the RECIRC position, the air in side the cab will become stale, so whe n the cab is t the FRESH/RECIRC selector lever(1) to the ever(1 In this position, the inside of the cab is pressurized to preve nt the entr y of dust. PREVENTION METHOD OF ENTRY OF DUST Entry of dust into the ca b can be prevented by startin g the blower fan for the he ater to raise the pressure in t he cab a l ittle higher than outsi When working in a dust y job site or when preventing dust from entering the ca b, use this fu nction. Close the windows a Set lever (1) to the F Press swith (2). Set lever (3) to the d