Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION CHECK COOLANT LEVEL, ADD COOLANT WARNING CAUTION than usual, check for 3 - 104 Do not open the radiator cap unless necessa ry. When checking th e coolant , always wait fo r the engine to cool down and check the sub-tank. Immediately afte r the engine is stopped, the coolant is at a high t emperatu re and th e radiator is under h igh internal pressure If the cap is rem oved to check the coolant l evel in this condition , there is a hazard of bu rns. Wait for t he temperature to go down, then turn the cap slowly to release th e pressure and remov e it carefully. When adding coola nt, use the step and handra il provided. Support y our bod y securel 1.

Open cover ( 1) of the platform on the ri ght side of the machine. 2. Check that t he coolant level is betwe en the FULL and LOW marks on rad iator sub-tank (2). If the coolant level is low , add coolant throu level. gh the coolant filler of sub-tank (2) to the FULL coolant, tighten the cap securely. nk becomes empty, there is probably coolant 3. After adding coolant, tighten the cap s 4. If the sub-ta nk becomes empty, the olant leakage. Afte r checking, repair any ab normality immediately. If n o abnormal ity is found, check the le is low, add COOLANT vel of the water in the of the same density in ensity table in "CLEAN n the radiator.

If it ity i n radiator acco rding to the COOLANT d INSIDE OF COOLING SYSTEM (P the sub-tank. AGE 4-21)", then add COOLANT to If the volume of coolant added is mor age. possible leak Confirm that there is no oil in the cool