The best insurance against accidents is to abide by the safety regulations. Read and understand this section carefully, before operating the excavator. Every user, however experienced, should carefully read and understand this section and those of the attachments and accessories before taking the excavator into operation. The owner is obliged to inform the operators of these instructions in detail. Keep this manual in the toolbox. 5. Track can be set at the narrow width 700mm and the standard width 860mm.
(for details see "OPERATION OF TRACK WIDTH CHANGE AND DOZER") Do not operate in narrow track width 700mm, there is a risk of the excavator tipping over, always operate in standard track width 860mm, except to pass through a narrow space on even ground. 1. BEFORE OPERATION 1. Make yourself acquainted with the excavator and be aware of its limits. Read this operator's manual carefully before starting the excavator. 2. Obey the danger, warning and caution labels on the machine. 3. For your safety, ROPS (Roll-Over Protective Structure) with a seat belt is installed. Always use seat belt when the machine is equipped with a ROPS.
Do not modify structual members of ROPS by welding, drilling, bending, grinding or cutting, as this may weaken the structure. If any component is damaged, replace it. Do not attempt repairs. If ROPS is loosened or removed for any reason, make certain all parts are reinstalled correctly. Tighten mounting bolts to proper torque. 4. The seat belt must be inspected regularly and replaced if damaged. 6. Do not use the excavator under the influence of alcohol, medication or other substances. Fatigue is also dangerous. 7. Check the surroundings carefully before using the excavator or when attachments are being attached. A Pay attention to the overhead clearance with electric wires.
A Check for pipes and buried cables. A Check for hidden holes, hindrances, soft ground and overhangs. (1) Seat belt SAFE OPERATION -1 SAFE OPERATION