-4 SAFE OPERATION 3. AFTER OPERATION Before leaving the machine, A Bring the excavator to hard even ground. A Lower the attachments and the dozer blade on the ground. A Stop the engine. A Lock all control levers. A Remove the key. 4. SAFE LOADING AND TRANSPORT OF THE EXCAVATOR 1. Observe all regulations concerning the transport of excavators on public roads. 2. Use adequately long and robust ramps when loading on a truck. (for details see "TRANSPORTING THE EXCAVATOR ON A TRUCK") 3. Do not change the running direction and to avoid a tipping over, do not try to swing the attachment crosswise to the loading ramps. 4. After loading of the excavator on a truck, engage the swing lock pin.
Lower the attachment on the loading plane and release the pressure from the hydraulic system. Block the crawlers with blocks and wire down the excavator. After loading the excavator on a truck, tie down the undercarriage of the excavator with a strong steel wire on the truck. (1) Lock lever (A) "Lock" (B) "Unlock" (1) Swing lock pin (A) "Lock" (B) "Unlock" 5. Do not brake abruptly with the excavator loaded. Fatal accidents could happen.