14 EXCAVATOR OPERATION CONTROLS FOR ATTACHMENTS B Working Light Switch If the key is in the "ON" position, the lights will be switched on by tipping the switch. The levers move the boom, arm and bucket as well as the swing frame. The lever positions and functions are as follows: [NOT TWO PATTERN SELECTION TYPE] To avoid personal injury: A Study and familiarize control lever functions by operating slowly. A Be sure to check the operating pattern in the label on the front hood before operating the excavator. (1) Working light switch (A) "ON (B) "OFF" C Night operation To avoid personal injury: A Visibility is reduced in darkness, so that the working light alone is not enough.
Prepare additional lighting, observe safety rules as well as special regulations for night work. [TWO PATTERN SELECTION TYPE] To avoid personal injury or death: A The control lever pattern on this machine is changeable. Before operation, check the current pattern. Otherwise the machine may get in trouble or you may get injured. A Before changing the control lever pattern, be sure to stop the engine. A Before operation, be sure to look around for safety. Move the levers slowly. A Make sure the control lever pattern has been changed as specified.