3.3.36. Injection pipe Semi-assemble a nut at both ends of the fuel high pressure pipe and tighten them up one by one to specified torque. Tighten hollow screws to assemble the fuel return pipe. Assemble the fuel return hose on the fuel injection pump. 3.3.37. Fuel filter Assemble the fuel filter with the air pipe bracket. Assemble the fuel feed hose accord- ing to the direction of an arrow impressed on the fuel filter head so that fuel can be fed in the sequence of FUEL FEED PUMP FUEL FILTER FUEL INJECTION PUMP. 3.3.38. Cylinder head cover Assemble the cover packing with the cover, install the cover on the head, then tighten the fixing bolts in sequence to specified torque.
Assemble the breather hose with PCV valve. EAMD126I - 96 - REASSEMBLY EQM300 Torque 3.0 kg.m EAMD120 Torque 1.2 kg.m