Move the bearing cap with hand, and release and reassemble it if no move- ment is detected. 3.3.17. Relief valve Assemble the relief valve. EAMD036I 3.3.18. Oil pump and oil pipe Install a dowel pin in the No.7 bearing cap, then assemble the oil pump with specified torque. Torque 4.4 kg . m Assemble the oil suction pipe with the delivery pipe, then install the bracket on the bearing cap. 3.3.19. Oil pan Mount gasket and put the oil pan EAMD095I thereon. Place stiffeners and tighten bolts. Align the bolt holes with gasket holes to prevent damage to the gasket and tighten to specified torque. EQM3076I - 85 - REASSEMBLY EAMD094 Torque 2.2 kg.m