ELECTRICAL RPM CONTROL – ALL MODELS Breaker Revolution Control, All Models 1) When the breaker pressure switch is hydraulically closed, the engine rpm will decrease to a preset speed. 2) The throttle control knob speed setting must be set higher than the preset speed. Breaker / Aux. pilot pressure The rpm for the breaker must be preset when using the breaker mode. The setting instructions are in the Optional Reset Procedure in Section 7 of this manual. When stepping on the breaker pedal, the pressure switch under the cab closes and a signal is sent to the controller. Engine rpm will decrease to the preset speed as long as the switch is closed.
When the pedal is returned to neutral, the engine rpm will return to the throttle knob setting. The throttle knob setting must be above the preset speed for breaker revolution control to function. 4 - 22 CX EXCAVATORS