ce t — Straight Travel

HYDRAULICS – CX130/CX160 TRAVEL Straight Travel 1) When performing travel operation + attachment operation or travel operations + swing operation, one pump is dedicated to the travel motors. The other pump will supply oil to the other functions. An example of straight travel is explained using the example of travel + boom raise operation. During travel operation, oil flow from pump1 (front pump) enters the PR port of the control valve and oil flow from pump2 (rear pump) enters the PL port of the control valve. When the right and left travel spools are shifted, oil flow is directed to the travel motors for forward or reverse operation. At this time each pump is dedicated to a travel motor.

When the boom raise operation is executed, the return circuit for the upper pilot pressure circuit is blocked. The resulting pressure rise in the upper pilot pressure circuit shifts the straight travel pilot valve. This in turn shifts the straight travel valve. Which directs flow from pump1 for boom operation and flow from pump2 is directed to both travel motors. This way boom raise operation is performed and straight travel is maintained. Oil from pump1 not needed by the upper attachment is routed to the pump2 travel circuit through an orifice and check valve to assist in travel speed during straight travel. 5 - 12 CX EXCAVATORS