ce t — CX130 / CX160

CONTROLLER CONTROLLER CALIBRATION PROCEDURE MACHINE: SH0200 –3 TERRITORY: 2 LANGUAGE: 1 CX130 / CX160 7. After inputting all machine information, start the engine and push the Cushion switch. The engine will go to full RPM then slowly lower to idle. Note: Coolant temperature must be above 122°F. The process is finished when the engine RPM can be controlled by the throttle control again. 8. Press the Auto mode switch to finish and return to normal display. 3 - 8 CX EXCAVATORS CONT. P/N KHR XXXX