CONTROLLER CURRENT CONDITION CHK3 This screen is used to verify that the controller is receiving the input from the listed switches and signals. SW1: Upper pressure switch, travel pressure switch, swing pressure switch and hammer pressure switch. SW2: Engine oil pressure switch and coolant level switch. SW3: Battery charge. SW4: Cushion switch (off/on), free swing switch and one touch idle switch. SW5: Swing lock switch, emergency stop switch, work light and wiper switch. SW6: Window washer switch, travel alarm and hammer mode switch. SW7: Key switch. 3 - 18 CX EXCAVATORS CHK MODE 2 H 3 SW4 0 0 0 0 SW1 0 0 0 0 SW5 0 0 0 0 SW2 0 0 0 0 SW6 0 0 0 0 SW3 0 0 0 0 SW7 0 0 0 0