ce t — SELF - CHECK CHK6

CONTROLLER SELF - CHECK CHK6 R: Engine Load Ratio (CX210/CX240) FT: Fuel Temperature (CX210/CX240) TV: Throttle Volume TR1: Transistor output has detected an over current TR2: Transistor output has detected an over current TR3: Transistor output has detected an over current TR4: Not Used NOTE: CHK6 does not appear on the screen. Transistor output can be checked for over current (short to ground) automatically. To do this hold down the one-touch idle switch while you turn on the key, then release the one-touch switch. You will hear the system check itself. If there is no over current is detected the travel alarm will sound.

3 - 29 CX EXCAVATORS CHK MODE 2 H 6 TR1 0 0 0 0 R 0 0 0 0 % TR2 0 0 0 0 FT 0 0 0 0 F TR3 0 0 0 0 TV 0 0 0 0 % TR4 0 0 0 0