ce t — Previous Data Holding

CONTROLLER RESETTING Previous Data Holding RST MODE Hi, H 1 RPM RPM SEC Push the Buzzer stop switch to select HLD (item selected will have a light background). 0 = Will hold default data 1 = Will turn off default data, will return to setting when key is turned off To set previous data holding feature, push the Travel mode switch until the numbers change to the predetermined value in each column. To set this data, press the Work mode switch for 10 seconds. The buzzer will sound to indicate when 10 seconds have elapsed. Turn the key switch off to complete the procedure. 3 - 54 CX EXCAVATORS PA 0 0 0 0 BRK 0 0 0 0 AU 0 0 0 0 L/M Not Used HLD 0 0 0 0 AI 0 0 0 0 OUT Not Used