SECTION 2 SAFETY PRECAUTIONS Page 4 GENERAL Fig.2.1. Fire extinguisher location in a machine equipped with GRAMMER operator’s seat If a machine is equipped with a operator’s seat other than GRAMMER one, the fire extinguisher is placed on the left hand side of a machine on the ROPS structure. Fig. 2.1A shows the fire extinguisher location. Fig.2.1A. Fire extinguisher location in a machine equipped with different operator’s seat than GRAMMER seat. The machine is equipped with a powder fire extinguisher, placed in a fire extinguisher holder that prevents its movement the machine operation. In case of fire the extinguisher is easy to remove.
The fire extinguisher is provided with an instruction label that gives how to use it and its application. The machine operator is to be familiarized with the fire extinguisher servicing. Electrical system is 24-volt negative ground. Each machine is equipped with a booster receptacle socket that is to be used during the engine start up with a booster battery. When the use of the booster receptacle socket is impossible in out- of-normal situations, follow the precautions given below to prevent chances of injury or damage to electrical circuits. TD-40C DRESSTA