SECTION 4 OPERATING Page 12 CAB CONTROLS 4. TEMPERATURE CONTROL KNOB This knob is used to control temperature inside the cab. To decrease temperature turn the knob to the left position and to increase temperature turn the knob to the right position. 4.6. CONTROLS AND ADJUSTMENT 4.6.1. SEAT SEAT ADJUSTMENT LEVERS Fig. 4.5. Seat 1. Weight Adjustment Lever 2. Seat Travel Lever 3. 15° Swivel to the Right Lever 4. Back Rest Cushion Adjustment knob 5. Back Cushion Tilt Lever 6. Seat Adjustment Knob The operator’s seat is adjusted as follows: Press tilt lever 5 to adjust required angle of back cushion. Turn the knob 1 to adjust to own weight. Move lever 2 forward to slide the seat back or forth.
Turn the knob 4 located on the left side to adjust backrest angle. For ripping operations lift lever 3 to swivel the seat 15° to the right. 4.6.2. SEAT BELT WARNING! Before driving the machine adjust the seat belt and fasten the seat belt. Adjust the belt to fit snugly and low around the hips to lessen the chance and severity of injury in the event of an accident. Never wear the belt across the abdomen. TD-40C DRESSTA