Komatsu — Fuse Capacity and Circuits

OPERATION ELECTRICAL Fuses Before replacing a fuse, be sure to turn off the starting switch The fuses protect the electrical equipment and wiring from a short circuit or overload condition. Replace the fuse if any of the following conditions are present: The fuse is corroded. There is white powder around the fuse. The fuse is loose in the fuse holder. Replace a fuse only with another of the same capacity. Fuse Capacity and Circuits Fuse Box 1 2-40 WA500-3LK No. Fuse Capacity Circuit 1 20A Main lamp circuit 2 20A Backup lamp, brake lamp 3 10A Turn signal indicator lamp 4 10A R.H. headlamp 5 10A L.H. headlamp 6 10A R.H. side clearance lamp 7 10A L.H.

side clearance lamp 8 10A Parking brake 9 10A Transmission control 10 10A Instrument panel 11 10A Work equipment positioner 12 10A Starting switch 13 20A Hazard lamp 14 20A Engine controller 15 10A Auto-greasing (if equipped)