Komatsu — Adjust Seat

Adjust Seat OPERATION Park the machine in a safe place and stop the engine when adjusting the operator’s seat. Adjust the seat position at the beginning of each shift or when operators change. Adjust the seat so that you can depress the brake pedal fully while sitting with your back against the backrest. (A) Fore-and-aft adjustment Pull lever (1) up; set the seat to the desired position; then release the lever. Adjustment range: . . . . . . . . . . . . . . . . . . . . . . . . 160 mm (6.30 in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

(16 mm (0.63 in) x 10 stages) (B) Adjusting seat angle Move lever (2) up and, while sitting, push down on the rear of the seat to tilt it backward. Move lever (2) down and push down on the front of the seat to tilt it forward. Adjustment range: . . . . . . . . . . . . . . 13 degrees (front and rear tilt) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (four stages each) (C) Setting seat for weight Sit on the seat; raise your body slightly; then turn grip (3) to adjust the strength of the suspension. Adjustment range: . . . . . . . . . . . 50 - 120 kg (110 - 265 lb) (target) (D) Adjusting backrest angle Move lever (4) up and move the backrest to the front or rear.

Adjustment range: Front: . . . . . . . . . . . . . . . . . . . 66 degrees (3 degrees x 22 stages) Rear: . . . . . . . . . . . . . . . . . . . 72 degrees (3 degrees x 24 stages) Remark If the backrest is reclined too far, the backrest may hit the rear glass. Move it to a position where it does not contact the glass. (E) Adjusting height of seat Move lever (2) up or down, then move the seat up or down to the desired position. Since lever (2) is also used for adjusting the seat angle, set the seat to the desired height while adjusting the angle. Adjustment range: . . . . . . . . . . . . . . . . . . . . . . . . .

60 mm (2.36 in) (F) Adjusting headrest height Move the headrest up and down to the desired height Adjustment range: . . . . . . . . . . . . . . . . . . . . . . . . . 50 mm (1.97 in) WA500-3LK 2-51