Normal Operation OPERATION After starting the engine, do not immediately start operations. First, perform the following operations and checks. Remark Do not suddenly accelerate the engine before the warming-up operation is completed. Do not run the engine at low idle or high idle continuously for more than 20 minutes. If it is necessary to run the engine at idle, apply a load from time to time or run the engine at a mid-range speed. 1. Depress accelerator pedal (1) lightly and run the engine with no load at mid-range speed for about five minutes. 2. Carry out the following operation to warm up the hydraulic oil only in cold weather. During the warming-up operation:
Check that the engine rotation is smooth. Set the work equipment safety lock lever to the FREE position. Move bucket control lever in and out of the TILT position to warm up the hydraulic oil. The relief time at the TILT position should be a maximum of 10 seconds. With this operation, the oil will reach the relief pressure and this will warm up the hydraulic oil more quickly. 3. After carrying out the warming-up operation, check that the gauges and caution lamps are normal. If there is an abnormality, carry out maintenance or repair. 4. Run the engine under light load until engine water temperature gauge (2) and torque converter oil temperature gauge (3) are in the green range. 5.
Check for abnormal exhaust gas color, noise, or vibration. If any problem is found, contact your Komatsu distributor. WA500-3LK 2-61