OPERATION Digging and Loading on Level Ground Do not set the bucket facing down more than 20 degrees. If the bucket hits rocks in the ground first, a large shock is generated; this may damage the machine. Remark When digging and loading on level ground, set the bucket edge facing down slightly and drive the machine forward. Be careful not to load the bucket on one side and cause an unbalanced load. This operation should be carried out in 1st gear. 1. Set the edge of the bucket facing slightly down. 2. Drive the machine slowly forward; operate the lift arm control lever forward to cut a thin layer of the surface each time when excavating the soil. 3.
Operate the lift arm control lever slightly up and down to reduce the resistance when driving the machine forward. When digging with the bucket, avoid putting the digging force on one side of the bucket. 2-74 WA500-3LK