Komatsu — V-Shape Loading

OPERATION Loading Operations Select the method of operation which will give the minimum amount of turning and travel in order to provide the most efficient method for the job site. Always keep the working area flat. Do not turn suddenly or apply the brakes suddenly while traveling with a raised load. This is dangerous. While loading, never thrust the bucket in soil or crushed rock when traveling at high speed. This is dangerous. Remark If the tires slip, the tire life will be reduced. Do not allow the tires to slip during operation. Avoid excessive bucket shaking. Cross-Drive Loading This method requires the least time for loading and is extremely effective in reducing the cycle time.

Always set the wheel loader facing at a right angle to the stockpile. After digging in and scooping up the load, drive the machine straight back in reverse and then bring the dump truck in between the stock pile and the wheel loader. V-Shape Loading Position the dump truck so that the direction of approach of the wheel loader is approximately 60 degrees from the direction of approach to the stockpile. After loading the bucket, drive the wheel loader in reverse; turn it to face the dump truck; and travel forward to load the dump truck. The smaller the turning angle of the wheel loader, the more efficient the operation becomes. 2-76 WA500-3LK