Komatsu — Replace Slow-Blow Fuse

Replace Slow-Blow Fuse MAINTENANCE Remark Always turn the power OFF when replacing the slow-blow fuse (turn the starting switch to the OFF position). Always replace the slow-blow fuse with one of the same capacity. 1. Turn the starting switch to the OFF position. 2. Remove the slow-blow fuse box from the chassis. 3. Open covers (1), (2), and (3) of the slow-blow fuse box. Covers (2) and (3) can be removed easily by using protrusion (A) on the body as a fulcrum and levering the catch of the cover with a flat-headed screwdriver to release it. 4. Loosen screws (4) and (5) and remove them.

When screws (4) and (5) are removed, slow-blow fuse (6) will also come off, together with electric wiring (7) and (8). 5. Using screws (4) and (5), install a new slow-blow fuse together with electric wiring (7) and (8) in the slow-blow fuse box; then close covers (1), (2), and (3). 6. Install the slow-blow fuse box to the chassis. WA500-3LK 3-39