Check for Loose Engine High-Pressure Piping Clamps, Hardening of Rubber MAINTENANCE Check visually and then use your hand to feel if there are any loose mounting bolts for the high-pressure piping clamps (1) to (15). Check if there is any hardening of the rubber parts. If any problem is found, the part must be replaced. Ask your Komatsu distributor to carry out the replacement. Remark If the engine continues to be used when there are loose bolts, hardened rubber, or missing parts, there is danger of damage or breakage occurring due to vibration and wear at the connections of the high-pressure piping. Always check that the proper high-pressure piping clamps are correctly installed.
WA500-3LK 3-73