OPTIONS, ATTACHMENTS Reversing the Tape If you want to reverse the tape while listening to it, press both FAST FORWARD, REWIND buttons (A) and (B) at the same time lightly. When this is done, the tape direction display will be reversed. Precautions When Using If a voltage greater than the specified voltage is input, it may cause fire, electrocution, or other failure. Never input any voltage other than the specified voltage. Places inside the radio are under high voltage. Do not remove the cover. Do not carry out any modifications. This may cause fire, electrocution, or other failure.
If you cannot hear any sound or nothing is displayed, or any other problem occurs, turn off the power switch and ask your Komatsu distributor to make repairs without delay. Stow the antenna when traveling in places with low overhead clearance. To ensure safety, always keep the volume at a level where it is possible to hear outside sounds during operation. If water gets inside the speaker case or radio, it may cause a serious problem. Be careful not to get water on the equipment. Do not wipe the display panel or buttons with solvents such as benzene or thinner. Wipe with a soft, dry cloth. Use a cloth soaked in alcohol if the equipment is extremely dirty.
Handling Cassette Tape Clean the tape head approximately once a month with a commercially available head cleaning tape. Do not leave the tape any place where it is exposed to direct sunlight, any place that is excessively dusty, or any place where there is a magnetic field. Do not use a 120-minute tape. This tape is thin and can easily get caught inside the machine. If the tape is slack, it can easily get caught inside the machine. Use a pencil to wind the tape to remove any slack. Do not use a cassette tape if the label has started to come off. It may cause defective rotation, or it may be impossible to get the tape out of the machine. 5-46 WA500-3LK