Temperature Control Switch OPTIONS, ATTACHMENTS The temperature control switch (5) is used to adjust the air temperature. Press and hold the UP or DOWN button to make the adjustment. The temperature level indicator lamps light up to display the temperature of the air coming from the vents. The more the blue lamps light up, the lower the temperature. The color of the indicator lamp changes while the switch is being pressed. When the temperature reaches the desired level, release the switch to set the temperature. The settings for each mode are retained in memory even when the starting switch is turned OFF. However, in the following cases, the settings must be reset.
When the machine has been out of use for more than seven days. When the battery voltage is extremely low. When there has been abnormal interference from outside. When the fan switch is turned OFF (the setting is not kept in memory with only the air conditioner switch). Remark If the air conditioner is used in the FRESH position, the inside of the cab will be pressurized; this will prevent the entry of dust. The higher the position of the fan switch, the more effective the pressurizing. WA500-3LK 5-49